The items related to the NJ/NX troubleshooter in the Sysmac Studio are given below. The supported devices and troubleshooter functions (NX-series) the Safety Control Unit, refer to the “NX-series Safety Control Unit User’s Manual (Z930-E1-07)”. The supported devices and troubleshooter functions (NJ-series) *1: A safety program may be required to reset errors for Safety Control Unit. For information on error reset in *1: The events (upper 4 digits of event the code are 0000Hex), which are error logs in the CJ-series Special *2: A safety program may be required to reset errors for Safety Control Unit.
For information on error reset Unit connected to the NJ-series CPU Unit, can not be neither displayed or deleted. in the Safety Control Unit, refer to the “NX-series Safety Control Unit User’s Manual (Z930-E1-07)”. 14 Item Function Multiview Explorer Multiview Troubleshooter Automatic Launch Automatic Launch Sets to automatically launch the NJ/NX troubleshooter when an event occurs. Explorer Security Settings Sets an authority for each access level to execute specific operations of the NJ/NX troubleshooter. Language Mapping Assigns a NA project language to a user event language of the NJ/NX project.
Target device for Sets the target device to save the screen capture and output of CSV file that are performed by the NJ/NX troubleshooter. screen capture and exported files User event User event The user event set in the Controller can be associated with the NA user pages.
System configuration Troubleshooter function Error display Error reset Event log display Event log reset NX-series CPU Unit Supported EtherCAT slave (Sysmac device) Supported EtherCAT slave terminal EtherCAT Coupler Unit Supported NX Unit Supported Supported *1 Supported System configuration Troubleshooter function Error display Error reset Event log display Event log reset CPU rack NJ-series CPU Unit Supported CJ Unit Supported Percially not supported *1 EtherCAT slave (Sysmac device) Supported EtherCAT slave terminal EtherCAT Coupler Unit Supported NX Unit Supported Supported *2 Supported