7.3.4. Connect Online and Transfer Project Data Connect online in Sysmac Studio and transfer the project data to Controller. Before transferring the user program, "Configuration / Setup" data, device variables, and CJ unit memory values from Sysmac Studio, check the safety of the transfer destination node. The device or machine may operate unexpectedly regardless of the operation mode of the CPU module. Be sure to confirm safety before resetting the controller or unit. 25 1 From the Menu Bar, select [Controller] – [Change Device]. 2 The Change Device Dialog Box is displayed. Confirm that [Device] and [Version] are set to use the controller in the right figure, and click [OK].
* If the settings are different, select from the pull-down menu. 3 If the setting shown in Item 2 is changed, the [Build] dialog is displayed. Click [Yes]. * If it has not been changed, this dialog will not appear.