26 4 From the Menu Bar, select [Controller] – [Communications Setup]. 5 The [Communications Setup] dialog opens. For [Connection type], select [Direct connection via USB]. Click [OK]. 6 From the Menu Bar, select [Controller] – [Online]. * If the confirmation dialog box shown on the right is displayed, the controller * Confirmation Dialog example 1 format or version is different from the device setting in the project file. Confirm the controller model and version, and the device settings in the project file, return to Step 1, and execute the procedure in this section again. Click [OK] in the dialog to close it.
* The model and version displayed in the confirmation dialog differ depending on the controller used and the device settings of the project file.