9 Manual name Cat. No. Model numbers Application Description AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT Communications User’s Manual I586 R88M-1□ R88D-1SN□-ECT Learning how to use the AC Servomotors/Servo Drives with built-in EtherCAT Communications. Describes the hardware, setup methods and functions of the AC Servomotors/Servo Drives with built-in EtherCAT Communications. GX-series EtherCAT Slave Units User’s Manual W488 GX-ID□□□□ GX-OD□□□□ GX-OC□□□□ GX-MD□□□□ GX-AD□□□□ GX-DA□□□□ GX-EC□□□□ XWT-ID□□ XWT-OD□□ Learning how to use the EtherCAT remote I/O terminals. Describes the hardware, setup methods and functions of the EtherCAT remote I/O terminals.
NX-series EtherCAT Coupler Unit User’s Manual W519 NX-ECC□□□ Leaning how to use an NX-series EtherCAT Coupler Unit and EtherCAT Slave Terminals The system and configuration of EtherCAT Slave Terminals, which consist of an NX-series EtherCAT Coupler Unit and NX Units, are described along with the hardware, setup, and functions of the EtherCAT Coupler Unit that are required to configure, control, and monitor NX Units through EtherCAT. NX-series NX Units User’s Manual W522 NX-AD□□□□ NX-DA□□□□ Learning how to use NX Units Describes the hardware, setup methods, and functions of the NX Units. Manuals are available for the following Units.
Digital I/O Units, Analog I/O Units, System Units, Position Interface Units, Communications Interface Units, Load Cell Input Units, and IOLink Master Units. NA-series Programmable Terminal Hardware User’s Manual V117 NA5-□W□□□□ NA5-□□W□□□□ Learning the specifications and settings required to install an NA-series PT and connect peripheral devices. Information is provided on NA-series PT specifications, part names, installation procedures, and procedures to connect an NA Unit to peripheral devices. Information is also provided on maintenance after operation and troubleshooting.
NA-series Programmable Terminal Software User’s Manual V118 NA5-□W□□□□ NA5-□□W□□□□ Learning about NA-series PT pages and object functions. NA-series PT pages and object functions are described.