3.2. Simulink PLC Coder & Sysmac Studio Operation Procedure 3.2.1. Outputting the Code using the Simulink PLC Coder You make a setting for outputting the code for the Sysmac Studio and output the code with test code from the Simulink. 23 1 Open the Sample File No. 1 PLCCoderDemoMC.mdl that is provided separately on the Simulink. 2 Click the Controller block to output the code and select PLC Code - Options from the Code Menu. 3 Select PLC Code Generation, and then select OMRON Sysmac Studio for Target IDE.