To remove a tray from the dock, pull the latch (near the center front of the dock) towards you until the tray pops free. To dock the OmniBook 1. From the Start menu, shut down the OmniBook. If you have a plug-and-play operating system, such as Windows 95, you do not need to turn off the OmniBook before inserting it into the dock. Caution Use only an HP F1454A ac adapter (the type shipped with your OmniBook). Using any other ac adapter could damage the OmniBook and may void your warranty. Refer to the warranty statement for your product. 2. Plug the power cord into the ac adapter, then into an ac outlet. Plug the ac adapter into the dock. 3.
Place the OmniBook on the dock platform, with the rear of the computer facing the dock's docking connector. 4. Position your fingers on the platform grips as shown below. Use your thumbs to push the computer into the dock until the computer slides into place. 35