1. From the Start menu, shut down the OmniBook. (This is not necessary if you are removing a battery from the plug-in module bay and inserting another battery). 2. Slide and hold the release latch, then pull out the module, as shown. 3. Slide the new plug-in module into the OmniBook until it clicks into place. Hint The battery module fits into either the plug-in module bay or the battery bay. Slide the front panel of the battery right or left so that it fits into the desired bay. To insert or eject a floppy disk When the OmniBook is reading or writing data to the floppy drive, the floppy disk indicator appears on the status panel.
Caution Do not insert or remove a floppy disk while the OmniBook is actively reading or writing data. Wait until the floppy drive is done. Otherwise, you could lose data or the OmniBook could stop responding. • Hold the disk with its face up, then slide it into the floppy drive slot (on the front of the OmniBook) until it clicks into place. • To remove the floppy disk, press the eject button next to the slot. To insert or remove a CD When the OmniBook is reading data from the CD-ROM drive, the CD-ROM/hard disk drives indicator appears on the status panel. Caution Do not insert or remove a CD while the OmniBook is actively reading data. Wait until the CD-ROM drive is done.
Otherwise, the OmniBook could stop responding. 29