Specifications, Regulatory, and Safety Information Regulatory Information Europe Products sold in Europe by Hewlett-Packard and its authorized dealers meet the specifications listed below. Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) Manufacturer: Hewlett-Packard Company Address: Hewlett-Packard Co. Mobile Computing Division 1000 NE Circle Blvd. Corvallis, OR 97330 declares that the following product Product name: HP OmniBook 800 , all models Options: All conforms to the following product specifications Safety: IEC 950:1991+A1,A2 / EN 60950 (1992)+A1,A2 EMC: CISPR 22:1993 / EN 55022 (1994): Class B * EN 50082-1:1992 IEC 1000-4-2:1995 / prEN 55024-2 (1992):
4kV CD, 8kV AD IEC 1000-4-3:1995 / prEN 55024-3 (1991): 3V/m IEC 1000-4-4:1995 / prEN 55024-4 (1992): 0.5kV signal lines, 1.0kV power lines Supplementary Information: The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC. The HP F1044B ac adapter used with this product is disconnected from the power by unplugging the power cord from the power outlet. Therefore, the power outlet should be located close to the product and be easily accessible. This declaration also applies to these dedicated peripherals and modules used with the OmniBook 800:
HP F1059C External Floppy Disk Drive, HP F1196C Quad Speed CD-ROM Drive, HP F1044B AC/DC Adapter * The product was tested in a typical configuration with Hewlett-Packard personal computer peripherals. Quality Department Hewlett-Packard Company Mobile Computing Division 3-9