Open AutoVISION and Create a Vision Job 1. Insert the Visionscape dongle into the PC and then Open AutoVISION. When AutoVISION or Visionscape is started, the AVPBackplane (avpsvr.exe) is automatically launched. The AVP Backplane is responsible for discovering all the cameras and allocating them to the vision system. This AVP Backplane is the Red Icon that can be seen in the system tray (see left hand image). Right clicking on the icon gives the menu shown in the center image. To view what the AVPBackplane is doing, click on “Display Debug Window”, and then click on the Visionscape Backplane icon in the task bar to open it. 2. Display the debug window.
It should show the camera being recognized as shown below. 3. Close the debug window and open the AutoVISION interface. Omron Automation Americas 18