Step 4 Remove the four mounting screws (callout 1). 21 Figure 100. Remove the laser/scanner assembly mount screws Step 5 Lift the laser/scanner assembly out of the chassis. Figure 101. Remove the laser/scanner assembly CAUTION When replacing the scanner assembly, verify that the locator pins on the assembly are properly seated. Failure to fully seat the locator pins can result in damage to the scanner assembly mounting surfaces when the mounting screws are tightened down. Note When replacing the scanner assembly, verify that the torrid ring on the seven-pin scanner harness is fully recessed into the provided well to prevent it from interfering with other internal components.
C7058-90936 Internal disassembly and assembly 129