To display the on-screen information on the TV / When the EXT DISPLAY button on the remote control is pressed, the information displayed on the screen (operation icon and time code etc.) can be displayed/not displayed on the TV. It will not display when the unit is turned off. HC-X900M HC-X900 EXT DISPLAY /VOL DATE/TIME STOP STILL ADV STILL ADV SEARCH STOP SKIP SKIP PAUSE PLAY SEARCH When the menu setting is changed, the information displayed on the screen (operation icon and time code etc.) can be displayed/not displayed on the TV. HC-X800 * This setting is only available in recording mode.
Refer to the following support site for information about Panasonic TVs with an SD card slot for playing back your pictures. http://panasonic.net/ It may not be possible to play back scenes on the TV depending on the recording format. For details on how to play back, please read the operating instructions for the TV. Connecting with a HDMI mini cable Select the desired method of HDMI output. MENU : [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p] [AUTO] determines the output resolution automatically based on information from the connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please read the operating instructions for the TV.) Image will not display on TV for a few seconds in the following cases.
j When the 1080/60p recording mode is turned on/off during Motion Picture Recording Mode j When you touch the play mode select icon to select [1080/60p], and then touch [ENTER] during Playback Mode j When the play mode select icon is set to in the Playback Mode, and it is switched between the 3D still picture and the 2D still picture j When the 1080/60p, 1080/60i, AVCHD 3D or Side-by-side scenes are switched 110 VQT4C76 MENU : [SETUP] # [EXT. DISPLAY] # desired setting [SIMPLE]*: Information partially displayed [DETAIL]: All information displayed [OFF]: Not displayed