Operation (continued) Setting the Kitchen Timer Setting a Standing Time Setting a Delayed Start 1 1 4 1 This feature allows you to program the oven as a kitchen timer. Press Timer (More) once. This feature can be used to delay the start of your cooking. To do this, first press Timer (More) . 2 2 Some recipes call for a standing time after cooking. Press Power Level until the desired power level appears in the display. 2 Set desired standing time using Number pads (up to 99 minutes, 99 seconds). 5 Set desired amount of time using Number pads (up to 99 minutes, 99 seconds). Enter the desired delay time (up to 99 minutes, 99 seconds) using the Number pads. 3 Press Start .
The timer will start and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done. 3 Set cooking time using the Number pads (see page 13 for maximum times). 3 Press Start . The timer will count down without cooking and beep five times when done. Press Timer (More) once. Press Power Level until the desired power level appears in the display. Caution: If oven lamp is lit while using the timer feature with door closed, the oven is NOT set properly; STOP OVEN IMMEDIATELY and re-read instructions. Continued on the Next Page 16