Channel surf mode All/Favorite/ Digital only/ Analog only Sets the mode to select the channel with the Channel up/down button. Favorite: Only channels registered as FAVORITE. (p. 18) Language English/Espacol/ Franзais Selects the screen menu language. Clock Adjusts the clock. (p. 15) Input labels (Display labels of connected devices) Selects the terminal and label of the external equipment. Devices connected to external input terminals can be labeled for easier identification during the input selection. (Input select (p. 21)) Terminals: HDMI 1-3/Component/Video Label:
[BLANK] Blu-ray/CABLE/SATELLITE/DVD/DVD REC/DVR/GAME/HOME THTR/ RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/MONITOR/AUX/ OTHER/Not used • You can also enter the label name directly. (Entering characters (p. 19)) Anti Image retention (Prevent Image retention) Pixel orbiter (Wobbling) Enable/Disable Enable: Shifts the display image automatically. 4:3 side bars (4:3 mode only) Off/Dark/Mid/ Bright Changes the brightness of the side bar The recommended setting is “Bright” to prevent the panel “Image retention”. (p. 53) Scrolling bar Press “OK” to start the horizontal “Scrolling” on the screen. • Press any key except the POWER key to return to previous screen.
• You will return to the previous screen if no key operation has been performed for 15 minutes. [Scrolling bar] ECO/energy saving No signal for 10 minutes (Stay on/ Power TV off) To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION continue for more than 10 minutes. • Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set. • “No signal for 10 minutes was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No signal for 10 minutes”. • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
No activity for 3 hours (Stay on/ Power TV off) To conserve energy, the TV automatically turns off when no operation of remote and side panel key continues for more than 3 hours. • Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set. • “No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No activity for 3 hours”. • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. Keyboard type Select keyboard type. Operate USB keyboard (p.
19) (U.S./Canadian French/Canadian Multilingual Standard/Spanish (Latin America)/Spanish (Spain)) Advanced setup Auto power on (No/Yes) Turns TV On automatically when the cable box or connected device is turned On. TV AC cord must be plugged into this device. TV turns on every time the power is restored. Image viewer auto play Slideshow/Photos/ Videos/Music/ Set later/Off Sets the media contents or playback type to play back SD cards automatically. Set later: “Image viewer settings” menu will be displayed repeatedly. “Using Media player” (p. 22) First time setup Restarts the first time setup from “Language” setting. (p. 13) About Displays TV version and software license.
Reset to defaults Performing Reset will clear all settings made with Setup, such as channel settings. • Password setting/entering (p. 19) 48 Setup Other function settings Settings Items Item Description ANT/Cable setup See p. 42-43 for more detail. Network settings See p. 36-38 for more detail. VIERA Link settings See p. 30-31 for more detail.