PanelScan Integration Guide • Click the Press When Done button when the + is centered. • The system then prompts you to click on the center of the lower-rightmost symbol. Zoom and scroll until it is in view, and then click on it. • Click the Press When Done button. If you were training a mirrored grid, you will be prompted to click the first mirrored symbol. If you were training a non-standard grid, you will be prompted to click each symbol in the order in which you want them to be reported until you have trained the entire set. When the training process is done, the system will automatically lay out all the inspection regions again, and then it will run a test on the current image.
Click the Trigger button to help the system complete the test. • If you are not satisfied with the box layout, you can re-teach the system. If you are satisfied, enter Run Mode by clicking Go To Run Mode . 18 Copyright © 2019 Omron Microscan Systems, Inc.