Instruments and Controls Lights and Switches AUTO Lamp With the START/STOP Switch in the OFF position if the lighting switch is in position 2 and the driver’s door is opened an audible warning will sound to alert the driver, the side lamps will remain on. Master Lighting Switch When the vehicle power system is in the ACC position, the auto lighting system defaults to the ON position (1). The auto lighting system will automatically switch the side lamps and switch illumination on and off according to the intensity of current ambient light. Dipped Headlamps With the vehicle power system switched to the ON/READY position, the auto lighting system defaults to the ON position (1).
The auto lighting system will automatically switch the side lamps, switch illumination and dipped headlamps on and off according to the intensity of current ambient light. When the START/STOP Switch is in the ON/ READY position, turn the master lighting switch to position 3 to operate the dipped headlamps, side lamps and switch illumination. Lights Off Turn the master lighting switch to position 4, this will switch off all lamps, releasing the switch will allow it to return to the AUTO switch position.
1 AUTO Lamp Side Lamps and Switch Illumination 2 Side Lamps and Switch Illumination When the START/STOP Switch is in the ACC position, turn the master lighting switch to position 2 to operate the side lamps and switch illumination. 3 Dipped Headlamps Daytime Running Lamp The daytime running lamps turn on automatically when the START/STOP Switch is in the ON/READY position. When the dipped headlamps are switched on, the daytime running lamps extinguish automatically. 4 Lights OFF When the START/STOP Switch is in the ON/ READY position, turn the master lighting switch to position 2 to operate the daytime running lamps, rear side lamps and switch illumination. 20