Chapter 1:
Introduction Quick Reference (See Chapter 2 for details.) Jumpers Description Default Setting JBT1 CMOS Clear See Section 2-7 JP3 Compact Flash Master/Slave Closed (Master) (*Note 2) JI 2 C1/JI 2 C2 SMbus to PCI Slot Open/Open (Disabled) JPF Power Force-On Open (Disabled) JPG1 VGA Enable Pins 1-2 (Enabled) JPL1/JPL2 Giga-bit LAN 1/LAN 2 Enable Pins 1-2 (Enabled) JWD Watch Dog Enable Pins 1-2 (Reset) Connectors Description 24-PIn ATX (JPW1) ATX 24-Pin Power Connector 8-Pin PWR (JPW2) 12V 8-pin Power Connector (Required) Alarm Reset (JPR1) Alarm Reset Chassis Intrusion (JL1) Chassis Intrusion Header COM1(J31), COM2 COM Port 1 & COM 2 Header Compact Flash Power (JWF1)Compact Flash PWR Connector (*See Notes on P.1-4) DIMM#1A,#2A,#1B,#2B Memory (DIMM) Slots (1 through 4) Fans 1-6 System Fan Headers (Fans 1-5), Fan6:
CPU Fan FP Control (JF1) Front Panel Control Header Floppy Connector (J27) Floppy Disk Connector GLAN1/2 (JLAN1/2) Ethernet RJ45 (Gigabit LAN) Port1/Port2 Connectors IDE(J3)/Compact Flash (J4) IDE Master/Compact Flash (*See Notes on Pg.1-4) IPMI IPMI 2.0 Socket KB/MS (J28) PS/2 Keyboard/Mouse Connector Printer Parallel Port (Printer) Header Power Fault (PW3) Power Fault Header (*See Chapter 2) Power SMB (PW4) Power System Management Bus (I 2 C) SATA 0-3 (I-SATA 0-3) Intel SATA Headers: ISATA0-ISATA3 SPKR Internal Buzzer Speaker (J9) Speaker Connector (Pins 3-4: Internal Buzzer, Pins 1-4:
External Speaker Cable) Slot 1-Slot 5 PCI 32-bit 33MHz slots Slot 6/Slot 7 PCI-X 64-bit 133MHz (Slot 6)/PCI-Exp x8 (Slot 7) USB1/2 (J15) Back Panel Universal Serial Bus Ports 1,2 USB3/4 (J46),USB5/6 (J45) Front Panel Accessible USB headers 3,4,5,6 VGA (JG1) VGA Connector WOL (WOL) Wake On LAN header WOR (JWOR) Wake On Ring header LED Indicator Description (*(Refer to Chapter 2 for details) LE 1 Onboard Standby PWR warning LED Indicator LE3/LE4 BIOS POST Code Indicators 1-5