PDSMA+/PDSMA-E+ User’s Manual Motherboard Features CPU • Single Intel Quad-Core QX6700/Xeon 3000 Series/Pentium D (Dual-Core)/ Pentium 4 Extreme Edition/Pentium 4/Celeron D LGA (Land Grid Array) 775 Processors at system bus speeds of 1066 MHz/800 MHz/533 MHz • Hyper-Threading (HT), EM64T, Enhanced Intel SpeedStep (EIST) supported Using the EM64T Feature Use a CPU that supports the EM64T Technology Install a 64-bit OS (Windows XP Professional x64 Ed, Server 2003x64 Ed.) Install the 64-bit drivers for all MB components, devices and add-on cards Using the Hyper-Threading (HT) Technology Use a CPU that supports Hyper-Threading Install an OS that supports HT, including Windows XP/2003 Server and Linux 2.4x.
(Under Linux, use the HT compiler to compile the code. For other oper- ating systems, be sure to disable the HT feature in the BIOS.) Enable the HT feature in the BIOS (under "Advanced" Setting) before install- ing a supported OS. (* Note : visit www.Intel.com for CPU support and driver updates.) OS Licensing Support Intel Dual-Core CPU supports: Windows 2000 Professional, Windows Advanced Server, Windows XP Home, Windows XP Professional, Windows Server 2003 (Standard, Enterprise) • Intel Dual-Core CPU and Hyper-Threading Technology supports: Windows 2000 Advanced Server, Windows XP Home, Windows XP Professional, Windows Server 2003 (Standard, Enterprise) Memory (* Note:
See Section 2-4 for details.) Four DIMM slots support Dual/Single Channel DDR2 667/533 MHz up to 8 GB of Unbuffered ECC/Non ECC two-way interleaved SDRAM. Chipset Intel 3000 (PDSMA+), Intel 3010 (PDSMA-E+) Intel ICH7R Intel PXH-V Expansion Slots Five (5) PCI 32-Bit/33 MHz (Slot 1- Slot 5) One (1) PCI-X 64-Bit 133 MHz (Slot 6) One (1) PCI-Exp x8 (Slot 7) BIOS 8Mb Firmware Hub Phoenix BIOS DMI 2.3, PCI 2.2, ACPI 1.0, Plug and Play (PnP) and SMBIOS 2.3 1-6