Pressure Roller Removal 1 Remove the following assemblies: • Remove the fusing assembly. (See “Fusing Assembly Removal” (page 179) for instructions.) • Remove the fusing film. (See “Fusing Film Removal” (page 183) for instructions.) 2 Remove the screw shown in figure 7-45, which holds the fusing entrance guide. 3 To remove the fusing entrance guide slide it toward the gears (see figure 7-45). Figure 7-45 Removing Fusing Entrance Guide Screw 4 Lift and remove the pressure roller. Figure 7-46 Removing the Pressure Roller C4170-90959 Parts Removal Tree 185