Engine Controller Assembly Removal 1 Remove the following assemblies: • Remove the toner cartridge. (See “Toner Cartridge Removal” (page 156) for instructions. • Remove Tray 2. (See “Tray 2 Removal” (page 157) for instructions.) • Remove the DIMM cover. (See “DIMM Cover Removal” (page 172) for instructions.) 2 Disconnect the fusing assembly’s left wire connector (see figure 7-47). • Remove the rear cover. (See “Rear Cover Removal” (page 177) for instructions.) 3 To disconnect the right wire connector press a flat blade screwdriver on the connector and then pull out the connector. (see figure 7-47).
Figure 7-47 Removing the Fusing Assembly’s Wire Connectors 186 7 Removal and Replacement C4170-90959