Tray 2 and Optional Tray 3 Paper Sizes Tray 2 and optional Tray 3 have settings for the paper sizes shown in the following table. Use only standard copier paper when printing from Tray 2 or optional Tray 3. Other types of printable media might jam when printing from Tray 2 or optional Tray 3. Table 2-3. Tray 2 and Optional Tray 3 Paper Sizes NOTE: Capacity may vary depending on media weight and thickness, and environmental conditions. For information about measuring basis weight, see “Basis Weight Field Test” (page 38). Envelope Specifications Envelope construction is critical.
Envelope fold lines can vary considerably, not only between manufacturers, but also within a box from the same manufacturer. Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following components: • Weight: The weight of the envelope paper should not exceed 105 g/m 2 (24 lb) or jamming may occur. • Construction: Prior to printing, envelopes should lie flat with less than 6 mm (0.25 in.) curl, and should not contain air. • Condition: Envelopes should not be wrinkled, nicked, or otherwise damaged. • Temperature: Use envelopes that are compatible with the heat and pressure of the printer. • Size:
Use only envelopes within the following size ranges. 76 by 127 mm (3 by 5 in.) 216 by 356 mm (8.5 by 14 in.) 32 Chapter 2 Operating Requirements C4170-90959 Tray 2 or Tray 3 Dimensions Weight Capacity Letter 216 by 279 mm (8.5 by 11 in.) 60 to 105 g/m2 (16 to 28 lb bond) 250 sheets of (80 g/m2) (20 lb bond) paper A4 210 by 297 mm (8.3 by 11.7 in.) Executive 191 by 267 mm (7.3 by 10.5 in.) Legal 216 by 356 mm )8.5 by 14 in.) B5 (ISO) 176 by 250 mm (6.9 by 9.9 in.) B5 (JIS) 182 by 257 mm (7.2 by 10 in.) A5 148 by 210 mm (5.8 by 8.2 in.) 8.5 x 13 in. 216 by 330 mm (8.5 by 13 in.) Minimum Maximum