You have requested the printer to load a sheet of paper, but the sheet appears to be too long. Check that the paper is not a roll. Either : Press the Enter key to try to load the sheet again; Or : Press the Cancel instructions on page 56 on the reverse of this The printer has finished the Troubleshooting routine and will not at this stage perform However, according to the evaluation you have given, the printheads require cleaning because there are defects in the Diagnostic Print. Press the Enter recurs, try using the Troubleshooting from the front panel (in the Ink System faulty.
Message Explanation and Action Front-Panel Error Messages 43 Sheet too long Please check it is not a roll Press ENTER to retry Press CANCEL to abort Troubleshooting finished Resume normal printing If problem persists select Troubleshooting again Press ENTER to continue Message Explanation and Action Sheet too long Please check it is not a roll Press ENTER to retry Press CANCEL to abort You have requested the printer to load a sheet of paper, but the sheet appears to be too long. Check that the paper is not a roll. Either: Press the Enter key to try to load the sheet again; Or: Press the Cancel key to stop the process.
If the paper is on a roll, follow the instructions on page 56 on the reverse of this Pocket Guide.