Check the shipping crate for damage Unpacking the motorcycle • Lever off the cover. • Take out the separate pack of items: – Documentation – Windscreen – Sump guard with fasteners • Force off cross-struts with a suitable lever. • When the motorcycle arrives, check the packing material immediately for damage and, if neces- sary, examine the contents for consequential damage. In case of damage in Germany • Note the damage on the delivery slip. • Read the information sheet on damage in transit. • Notify the supplier without delay (e.g. freight company or DB) and also Bavaria Wirtschaftsagentur GmbH Abteilung ZW - 12 D-80788 Mьnchen Tel. 089/14327-632 Fax. 089/14327-709 e Caution:
Do not knock the cross-struts out or the motorcycle may be damaged. • Remove the end-walls. • Remove the side-walls. e Caution: Remove any nails projecting from the base of the packing or lying on the base or on the floor. In case of damage in importer markets • Loosen the front tensioning straps. • Release the handlebar and resecure in correct position (punch marks aligned). e Caution: Do not push the motorcycle until the handlebar has been secured in the correct position. X Tightening torque: Handlebar to fork bridge .............................. 21 Nm • Note the damage on the delivery slip. • Comply with specific national market proce- dures. In case of doubt, please submit enquiries to:
Bavaria Wirtschaftsagentur GmbH Abteilung ZW - 12 D-80788 Mьnchen Tel. +49 (0)89 14327-632 Fax. +49 (0)89/14327-709 • Notify the supplier (e.g. freight company) without delay. • Loosen the rear tensioning straps. • Push the motorcycle forwards off the pallet. • Remove the set of keys from the left rear footrest. • Dispose of the packing materials in an environ- mentally responsible manner as described in Service Information 23/91 - Sales - . 00.14