Removing and installing starter motor e Caution: Disconnect earth (ground) lead from battery. Insulate earth (ground) lead. • Release starter motor cover (1). • Remove the cover. • Detach lead (2). • Release starter motor retainer (3). • Remove the starter motor. • Install by following the above work instructions in the reverse order. X Tightening torque: Starter motor to engine ................................ 20 Nm Starter motor cover to gearbox housing ......... 7 Nm Positive lead to starter motor ....................... 10 Nm 12.8 2 3 1 C120020 C120020