00.4 Model R 850/1200 C Connection Nm 11 Engine Oil filter Oil filter 11 Oil drain plug 32 Oil pump Mesh filter basket to engine block 9 Oil pump cover 9 Pressure relief valve 35 Oil pressure switch 30 Oil cooler Oil cooler pipe to engine block 10 Cooling oil line - banjo screw with oil vent valve 25 Oil cooler to frame 9 Oil cooler return line to engine block 35 Screw-in union for oil cooler connection at engine block 35 (clean threads and apply Loctite 603 to inner and outer threads and in the contact face area) Cylinders Tightening sequence: 1. M 8 screw 2. M 6 screw 3.
Chain guide rail pivot screw 20 9 18 Timing chain Chain tensioner 32 Connecting rod Big end cap Joint torque Additional wrench angle 80° 20 Crankcase Tightening sequence: 1. M10 screw (oiled) 2. M 8 screw (oiled) 3. M 6 screw 45 20 9