Changing engine oil, renew oil filter element • Unscrew oil drain plug and drain off oil. • Fit new seal and screw in drain plug. (Inspections I, II, III and IV) L Note: If the motorcycle is ridden only for short distances or outside temperatures are below 0°C (32°F): change the oil and renew the oil filter element every 3 months, but at least every 3 000 km (1 800 miles). • Change the oil while it is at regular operating temperature. 11 4 650 C000030 • Use oil filter wrench, BMW No. 11 4 650 , to un- screw and remove the oil filter. • Coat sealing ring on new oil filter element with oil and screw in. • Add oil. • Insert and tighten the screw plug.
• Check engine oil level with the motorcycle in a horizontal position; use the auxiliary stand, BMW No. 00 1 550 . e Caution: Never add engine oil above the MAX mark. C000240 • Remove screw plug. X Tightening torque: Oil filter......................................................... 11 Nm Oil drain plug................................................ 32 Nm Fill quantity for engine: With oil filter change .. 3.75 l (6.6 Imp. pints/3.96 US quarts) Without oil filter change .. 3.50 l (6.2 Imp. pints/3.69 US quarts) Oil volume between MIN and MAX marks......0.50 l (0.88 Imp. pint/0.52 US quart) Engine oil grade:
Brand-name HD oil for four-stroke spark-ignition en- gine, API classifications SE, SF, SG; combination with CC or CD specification. 00.12