Checking brake system for correct operation and freedom from leaks; repairing/renewing if necessary Rear brake • Position the motorcycle horizontally with auxiliary stand, BMW No. 00 1 550 . • Brake fluid must not drop below the minimum level (arrow). (Inspection III) • Checking brake system for leaks. Checking brake fluid level L Note: The brake fluid volume (between MIN and MAX) is sufficient for the complete range of pad wear from new to the wear limit. It is not normally necessary to add fluid to compen- sate for pad wear. If the level drops below the minimum mark, this indi- cates some other fault.
(Inspections I, II and III) C000090 Brake fluid grade .........................................DOT 4 Front brake • Make sure that the specified setting (distance between handlebar and fuel tank 30-50 mm/ 1.2-2 in) is correct. • Check with the motorcycle on its side (prop) stand. • Turn the handlebar fully to the left. • The brake fluid must not drop below the mini- mum level 2 mm (0.08 in) below the ring mark (ar- row). CUB0110 Brake fluid grade .........................................DOT 4 00.18