RS110050 • Install the end cover with an O-ring which is in good condition. X Tightening torque: M 6 screw ...................................................... 9 Nm RS110100 • If necessary, reduce end play to a minimum by repositioning the bearings. Rocker end float: min............................................ 0.05 mm (0.002 in) max........................................... 0.40 mm (0.016 in) 11.59 RS110940 • Install cylinder head cover. e Caution: Ensure that gaskets are properly seated. Gaskets and sealing face must be free from oil and grease. X Tightening torque: Cover screw................................................... 8 Nm RS110440 • Tighten air intake stub pipe.
X Tightening torque: M 6 screw ...................................................... 9 Nm