RI3000 User Manual V1.1 2.7 Optional Parts The following parts are optional. If require, please order . 2.7.1 Remote control panel Chapter 2 2.7.2 Communication cable 2.7.3 Field bus Adaptor -24- Part name model Features Description Remote control pane RI3000-YK01 （No LCD liquid crystal display） 1. Control slave inverter to run, stop, jog run, fault reset, change setting frequency, change function parameters and running direction. 2. Monitor slave inverter’s running frequency, setting frequency , output voltage, output current, bus bar voltage, etc. 1. RS485 communications applied between remote control panel and inverter which are connected by a 4- core cable via RJ45 network port. 2.
The maximum connection distance is 500M. The inverter supports local control panel and remote control panel used at the same time, no priority. Both can control the inverter. Hot plug in for remote control panel is available. RI3000-YK02 （Have LCD liquid crystal display） Part name model Features Description Commun ication cable for remote control panel RI3000- LAN0020 （2.0m Used to remotely operate the keyboard and the drive host connection. Standard options:1m, 2m, 5m, 10m, 20m. Which is more than 20m can be customized for the remote keyboard and inverter connection.
Part name Features Description Communication cable for remote control panel The inverter can be connected into MODBUS field bus net work via adaptor as a slave station in the network. Please refer to Chapter 9 for communication protocol.