3.1 Migrate an EM2100 Primary Fleet Manager Appliance from a Legacy MSS 4.X Solution to the Fleet 13. Within the SNG Web UI select the Software Tab and select the Manage Installed Soft- ware page from the left hand list. 14. Click on the Choose File button at the top of the page. 15. Navigate to the FLOW Core 1.0 software file and select it for upload. The filename should appear next to the Choose File button. 16. Now click on the Upload File button. The FLOW Core software is now fully installed, and you can configure the operating mode of the EM2100. 17. Select the System tab and select the Mode page from the left hand column. 18.
Choose the EM2100 appliance operational mode using the drop-down menu. a. If your system is using only one EM2100 appliance, select the Standalone Fleet Manager option, click the Apply button, then proceed to Step 22 . b. If your system has a second EM2100 acting as a redundant unit, then make sure the secondary is also migrated to FLOW Core software, select the Paired Fleet Manager option, and click the Apply button. Proceed to Step 20 . NOTE: If you select the Paired Fleet Manager option, you must designate, this EM2100 as either Primary or Secondary (redundant) Fleet Manager. 14 Fleet Operations Workspace Core Migration Guide 20569-063 Rev. A