SAMI G S 2 Delivery Checks Check that the device does not show any signs of damage and that the delivery is complete (refer to the type designation code presented below). In the event of damage, please contact your insurance company or the supplier. If the delivery is not in compli- ance with the order, please contact the supplier immediately. Note! Do not destroy the packing. The template printed on the protective cardboard can be used for marking the fixing points of the SAMI GS on the wall. If the device is stored before commissioning, check that the environmental conditions in the storage room are acceptable (temperat- ure -40 o C to +70 o C; relative humidity no condensation allowed).
ACS 501-004-3-00P20 AC=AC drive The guarantee covers defects in manufacture. The manufacturer carries no responsibility for damage occurred during transport or unpacking. Product type: S=Standard product Family: 50=SAMI GS Under no circumstances shall the manufacturer be liable for damages and failures due to misuse, abuse, improper installation or abnormal conditions of temperature, dust or corrosives or failures due to operation above rated capacities. Nor shall the manufacturer be liable for consequential and incidental damages. Sizes: 1=004 to 070, wall mounted unit Rated power (kVA) Supply voltage:
3=380V/400V/415V 5=440V/460V480V//500V The period of manufacturer's guarantee is 12 months from commissioning and not more than 24 months from the date of delivery. Optional Control Card 1: 0=none 3=SNAT 7610 BAC Local ABB companies or distributors may have a different guarantee period, which is specified in their sales terms and conditions and guarantee terms. Optional Control Card 2: 0=none, 2=I/O Extension Card If any queries arise concerning the SAMI GS, please contact your Distributor or ABB local office. Control panel P=yes Enclosure class 2=IP 21 5=IP 54 Braking Unit 0=No braking chopper 1=Braking chopper Figure 2-1. Type designation code. 7