SC-B9580 User's Guide Basic Operations ❏ Media Settings: The settings that are registered to the printer's Media Management for the Platen Gap, Feeding Tension, and so on, that are appropriate for the media you are using. Do not carry media with the media surface pressed against clothing. Handle paper in its individual packaging until just before loading the paper in the printer. When using the software RIP Epson Edge Print supplied with the printer, downloaded the EMX file from Epson Edge Print. Notes on Loading Media U “Using Epson Edge Print (Windows only)” on page 31 Caution: ❏ The heater may be hot; observe all necessary precautions.
Failure to observe the necessary precautions could result in burns. When using a commercial software RIP, download the EMX file using Epson Edge Dashboard. U “Using Epson Edge Dashboard” on page 31 ❏ Because the media is heavy, it should not be carried by one person. We recommend using a lifter for media that weighs over 40 kg. Notes When Handling Media ❏ Be careful not to trap your hands or fingers when opening or closing the printer cover. Failure to observe this precaution could result in injury. ❏ Do not rub your hands along the edges of the media. The edges of the media are sharp and can cause injury.
If the following points are not observed when handling media, small amounts of dust and lint may stick to the media surface and cause ink drops in the print results or cause the nozzles to clog. Do not place exposed media directly on the floor. Load the media just before printing. Media should be rewound and inserted in its original packaging for storage. The pressure may crease media left in the printer. The media may also become wavy or curled, causing jams or resulting in the media coming into contact with the print head. Do not load media if the right and left edges are uneven.
If media is loaded and the right and left edges of the roll are uneven, media feeding problems may cause the media to move around during printing. Either rewind to align the edges or use a roll without any issues. 37