SC-B9580 User's Guide Basic Operations B Press How To... to view the loading procedure. A When you have finished loading the media, the Media Settings screen is displayed. Press Media to select the registered media number that contains the settings corresponding to the loaded media. Follow the on-screen instructions to perform the procedure. Make Settings for Loaded Media When Media Settings have not been registered for the loaded media In this situation, select an unregistered number. If you select an unregistered number, the screen where you can select the Media Type is displayed. Select the Media Type that matches the type of media you have loaded.
When you have finished loading the media, follow the instructions on the control panel to make settings for the loaded media. 1. Select the registered media number Select the registered media number that contains the media settings corresponding to the loaded media. To change the media type later, press - Edit - Media Type on the screen where the registered media number is displayed. 2. Select the roll winding direction Select the winding direction for the loaded media roll. 3. Set the media length When Media Settings have been registered for the loaded media/EMX files have already been downloaded Set the length of the loaded media.
The amount of media remaining is managed based on the length entered here. Select the registered media number. B Check the roll specifications. On the Media Settings screen, check that the winding direction matches the winding direction for the loaded media. 39