SC-B9580 User's Guide Control Panel Menu 93 Item Parameter Explanation Media 01 XXXXXXXXXX to 50 XXXXXXXXXX Choose the Media Settings to use. The registered name appears in XXXXXXXXXX. Media Type Displays the currently selected Media Type. Media Width Sets the Media Detection items. U “General Settings Menu” on page 83 Advanced Settings You can change the Advanced Settings for the registered media selected in Media. See the following table for details on the setting content. U “Media Management items” on page 94 Print Adjustments Automatic Adjustment Manual Adjustment Media Feed Adjust- ment Manual (Standard) Use this menu if you notice banding or graininess in printing results.
See the following for more information. U “Optimizing Media Settings (Print Adjustments)” on page 47 Manual (Measurement) Print Head Alignment Media Management 01 XXXXXXXXXX to 50 XXXXXXXXXX Change the registered Media Settings. U “Media Management items” on page 94 Press the area to the right of Media Settings to copy the currently selected settings to another media setting number, or initialize all settings. Remaining Amount Management Remaining Amount Management On When On is selected, you can set Remaining Amount and Remaining Alert. Setting each item to manage the remaining amount makes it easier to know when it is time to replace the media.
Once this is set to On, when you have loaded the media, you will be prompted to enter the registered media settings number and the media length (Remaining Amount). Off* Remaining Amount 1.0 to 999.9 m (50.0 m*) (3.3 to 3280.5 ft [164.0 ft*]) Sets the total length of the loaded media. You can set in increments of 0.1 m (0.1ft). The amount of media remaining is estimated based on the length you set here and the length of the printout, and is displayed on the Home screen. Remaining Alert 1.0 to 15.0 m (5.0 m*) (3.3 to 49.2 ft [16.4 ft*]) Sets a value at which point a warning message is displayed to inform you that the remaining amount of media is too low.
You can set in increments of 0.1 m (0.1 ft). Print Length Management