SC-T7630D/SC-T5630DM User's Guide Introduction B Information display area Displays the printer's status, error messages, and so on. is displayed, the amount of empty space in the Maintenance Box is low. Press the display area to check the Maintenance Box model number. Displays the approximate amount of available space in the Maintenance Box. When C Paper loading information Displays paper information for the loaded paper. H Paper Release Releases the paper allowing you to pull it out. This is disabled during paper feeding or printing. D Reserve Paper Switching Press during printing to switch to the paper from the selected paper source to use it for the next page.
You can select this when there is no paper loaded in either paper source. Press during printing to display the Paper Setting screen. I Network icon The network connection status is indicated by an icon as shown below. E Displays the ink levels Pressing the icon allows you to switch the network connection status. Displays the amount of ink remaining. The abbreviation below the bar indicates the ink color. U “Changing the Network Connection Methods” on page 35 SC-T7630D/SC-T5630DM BK : Black C : Cyan M : Magenta Y : Yellow LC : Light Cyan LM : Light Magenta When is displayed, the corresponding ink is running low. Press the display area to check the model number for the ink supply unit.
F Displays the amount of space remaining in the Borderless Maintenance Box. Displays the approximate amount of available space in the Borderless Maintenance Box for borderless printing. When J Maintenance You can check and clean the print head nozzles, replace consumables, and clean parts. is displayed, the amount of empty space in the Borderless Maintenance Box is low. Press the display area to check the Borderless Maintenance Box model number. K Switch screens You can switch the Home screen display. G Displays the amount of space remaining in the Maintenance Box L Inside Light 16 Not connected to a wired LAN or the wired LAN or wireless LAN not set. Connected to a wired LAN.
Wireless LAN (Wi-Fi) is disabled. Searching for SSID, IP address not set, or signal strength is 0 or poor. Connected to a wireless LAN (Wi-Fi). The number of lines indicates the signal strength. The more lines there are, the better the signal strength. Wi-Fi Direct (simple AP) connection is disabled. Wi-Fi Direct (simple AP) connection is enabled.