Seres — Seres user manual (EN)

3. Be sure there are no fuel line leaks Keep finished surfaces and wheels free of all gasoline, oil, etc. Protect painted surfaces with auto- motive type wax. We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and transmis- sion are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower. and clamps are properly positioned. 4. Immediately wipe up any spilled gaso- line. Clamp Clamp Fuel Filter- CLEANING Clean engine, battery, seat, finish, etc. of all foreign matter. & WARNING:

TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER- VICE OR ADJUSTMENTS: 1. Depress clutch/brake pedal fully and set parking brake. 2. Place gearshift lever in neutral (N) position. 3. Place attachment clutch in "DISENGAGED" position. 4. Turn ignition key to "STOP" and remove key. 5. Make sure the blades and all moving parts have completely stopped. 6. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TRACTOR TO REMOVE MOWER 1. Place attachment clutch in "DISEN- 5. Remove retainer spring holding anti-swaybar to chassis bracket and disengage anti-sway bar from bracket. 6.

Remove four retainer springs from front plate assembly and remove plate. 7. Remove retainer springs from suspen- sion arms at deck and disengage arms from deck. GAGED" position. 2. If equipped, turn height adjustment knob to lowest setting. 3. Lower mower to its lowest position. 4. Disengage belt tension rod from lock bracket. _, CAUTION: Rod is spring loaded. Have a tight grip on rod and release slowly. 8. Raise attachment lift to its highest posi- tion. 9. Slide mower forward and remove belt from electric clutch pulley. 10. Slide mower out from under right side of tractor.

Belt Tension Rod Lock Bracket Front Mower Bracket Electric Clutch Pulley Double Loop Retainer Springs Plate - Assembly (Disengaged ...______--_/ Position) 1/ Chassis Bracket Retainer Spring Single Loop Retainer Springs -Flanged Pins Anti-Sway Bar Front Mower Bracket USE PLIERS FOR RETAINER SPRING, _ Suspension Arm Double Loop Retainer Springs (Outward pointing deck pins) 19 --- ector Shteld _