i, illlJllJll ,i i Ill i, ill iiJlllllj .l= I ill,,ll IJl J; OPERATION KNOW YOUR SNOW THROWER ...................................... READ THIS OWNER'S MANUALAND SAFETY RULES BEFORE OPERATING YOUR SNOW TH ROWER, Compare the illustrations with your snow thrower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference_ AUGER DRIVE LEVER TRAC'fION DRIVE LEVER SPEED SHIFTER LEVER CRANK ASSEMBLY CHUTE DEFLECTOR WEIGHT TRANSFER BUTTON DISCHARGE CHUTE IGNITION KEY RECOIL STARTER HANDLE CHOKE CONTROL THROTTLE CONTROL L I wmuw± SEARS TRAC-PLUS SNOW THROWERS conform to the safety standards of the American National Standards Institute. FIG.
7 AUGER DRIVE LEVER: Starts and stops the auge'r"and" impeller (snow gathering and throwing)= TRACTION DRIVE LEVER - Propels the snow thrower' forward and in reverse. WEIGHT TRANSFER PEDAL - Engage for heavy snow conditions, to keep the snow thrower from climbing drifts and hard-packed snow.. When released, it eases trans- port of the snow thrower° HEIGHT ADJUST SKIDS - Adjusts the ground clear- ance of the auger housing. IGNITION KEY - Must be inserted to start the engine. RECOIL STARTER HANDLE - Starts the engine manu- allyo CHOKE CONTROL - Used to start a cold engine. PRIMER BUTTON - Injects fuel directly into the carbu- retor manifold for fast starts in cold weather_.
SPEED SHIFTER LEVER - Selects the speed of the snow thrower (6 speeds forward and 2 speeds reverse). CRANK ASSEMBLY * Changes the direction of snow throwing through the discharge chute. CHUTE DEFLECTOR - Changes the distance the snow is thrown° DISCHARGE CHUTE - Changes the direction the snow is thrown. THROTTLE CONTROL - Controls the engine speed.. 10