ASSEMBLY CHECK TIRE PRESSURE ,/CHECKLIST The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance_ BEFORE YOU OPERATE AND ENJOY YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SA TfSFA CTION FROM THIS QUALITY PRODUCT, ° Reduce tire pressure to PSi shown in "PRODUCT SPECIFICATIONS" on page 3 of this manual PLEASE REVIEW THE FOLLOWING CHECKLIST: CHECK DECK LEVELNESS / All assembly instructions have been completed° ,/ No remaining loose parts in carton. For best cutting results, mower housing should be properly leveled.
See 'q'O LEVEL MOWER HOUSING" in the Service and Adjustments section of this rnanual. v" Batteryis properly prepared and charged. (Minimum 1 hour at 6 amps)o ,/ Seat is adjusted comfortably and tightened securely. CHECK FOR PROPER POSITION OF ALL BELTS v" All tires are properly inflated. (For shipping purposes, the tires were overmflated at the factory). See the figures that are shown for' replacing motion and mower blade drive belts in the Service and Adjustments section of this manual° Verify that the belts are routed correctly, / Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).
V" Check mower'and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers. CHECK BRAKE SYSTEM After you learn how to operate your tractor, check to see that the brake is properly adjusted_ See '_TO ADJUST BRAKE" in the Service and Adjustments section of this manual ,/ Check wiring_ See that all connections are still secure and wires are properly clamped. WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA A TTENTION TO THE FOLLOWING IMPORTANT' ITEMS: / Engine oil is at proper' level, v' Fuel tank is filled with fresh, clean, regular unleaded gasoline.
,/ Become familiar with all controls - their location and function, Operate them before you start the engine_ / Be sure brake system is in safe operating condition. 10