Safety Instructions Features Operation Requirements Installation Instructions Washer Use Washer Care Troubleshooting * Required spacing Installing in an alcove or closet Minimum clearances between your washer and adjacent walls or other surfaces are: Either side: 1 in. (2.5 cm) Rear: 6 in. (15.2 cm) Closet Front: 2 in. (5.1 cm) Top: 24 in. (61 cm) Gap between the end of water valve and the wall: 6 in. (15.2 cm) If you install your washer and dryer side-by-side in a closet, the closet front must have an unobstructed air opening of at least 72 square inches (465 square cm). 17 E 57.87 in.(1470 mm)