Fusing motor (M1) To remove the fusing motor Note Turn the printer off, wait five seconds, and then unplug the printer. 1 Remove the top cover. 2 Remove the left side cover. 3 Remove the fusing assembly. 4 Remove the screw shown in callout 1, and remove the black plastic piece. 5 Disconnect connector J102 from the paper feed PCB. 6 Remove the screw that secures the white cable trough to the chassis (callout 2). 3 2 1 Figure 6-47 Fuser motor removal and replacement (1 of 2) C7085-90921 Chapter 6 Removal and replacement 185