Table 4. Performance of ADF for copying/scanning Category Specification Scan resolution 600 PPI (24-bit pixels per inch) optical, with 256 levels of gray and 24-bit color Copy speed Up to 15 ppm Table 5. Electrical specifications 110-V Models 220-V Models Power requirements Note: Power sources are not interchangeable. 110 to 127 volts +/-10% 50 to 60 Hz +/-2 Hz 220 to 240V +/-10%, 50 to 60 Hz +/-2 Hz Minimum recommended circuit capacity 4.5 A at 115 V 2.3 A at 230 V Power consumption Copying (maximum): 330 W Printing (maximum): 300 W Standby: 14 Watts Power save: 14 Watts Copying (maximum): 330 W Printing (maximum): 300 W Standby: 14 Watts Power save: 14 Watts Off:
0 Watts Values subject to change. See http://www.hp.com/support/lj3300 for current information Table 6. Acoustic emissions (HP LaserJet 3300mfp series) Sound Power Level Declared per ISO 9296 Printing (maximum) Copying (maximum) Standby/PowerSave L WAd = 6.1 Bels (A) L WAd = 6.6 Bels (A) Essentially inaudible SPL Bystander Position Declared per ISO 9296 Printing (maximum) Copying (maximum) Standby/PowerSave L pAm = 48 dB (A) L pAm = 50 dB (A) Essentially inaudible Values subject to change. See http://www.hp.com/support/lj3300 for current information. During other operations, acoustic emissions may vary. 20 Chapter 1 - Product information EN