Developer’s menu Use the developer’s menu to adjust fax data store parameters and to run various tests. Below is a hierarchical diagram of the developer’s menu: Main menu Submenu Submenu Developer’s menu ............ R/W parameter Monitor test ...................... Onhook monitor Offhook monitor Eavesdrop monitor Signal power monitor LIU test............................. LIU inputs LIU ID Loopback test Transmit test To gain access to the developer’s menu: 1 Make sure that the control panel display reads Ready . 2 Press menu/enter . 3 Press the * and # keys on the keypad. Note You can access the developer’s menu from any other menu by pressing the * and # keys on the keypad.
4 Use the keys to navigate the developer’s menu. 5 To exit the developer’s menu and remove it from the menu tree, press cancel to return to the Ready display, then press cancel again. 230 Chapter 6 - Troubleshooting EN