1.1.3.1.2 Support Warning: Be sure to park the vehicle on a hard, flat ground. If you want to jack up the vehicle on soft ground, you must place a load dispersing block under the jack. Be sure to place the stopper in the opposite direction of the diagonal wheel position from the top point. Failure to follow these instructions may cause personal injury. When a jack is required for maintenance of a vehicle, it is essential to fully understand the following guidelines. The correct support point must be confirmed. The support point is usually selected in the open area between the front and rear wheels. When using a jack, apply a liner to protect the paint from damage. 1.1.3.1.3 Lifting Warning:
Using the correct lifting position is very important for the safety of lifting. Otherwise, it may damage the vehicle or cause personal injury. Note: When using a two-post lift to lift the vehicle, horizontal pads must be used in the lifting position. 1.1.4 Maintenance period 1.1.4.1 Description and operation 1.1.4.1.1 Maintenance items When inspecting, repairing and maintaining electric vehicles, special attention must be paid to safety to prevent accidents. The matters needing attention are as follows: When repairing and maintaining the vehicle, please make sure that the vehicle is powered off and the battery repair switch is in the off state.
Non-professional maintenance personnel are strictly prohibited to disassemble the terminal cover of the motor three-in-one assembly. After the motor is started and running, it is forbidden to touch high-voltage lines and high-voltage parts with warning signs. When the motor is running, keep hands, feet, clothes, tools and other objects inaccessible. 18