Reference Reference Setup menu 24p Output Content recorded at 24p* 3 , such as BD-Video films, is output at 24p when played back. When this unit is connected to TV compatible with 4K/24p and “Resolution” is set to “Auto” or “4K”, images will be output in 4K/24p. When this unit is connected to a TV compatible with 1080/24p and “Resolution” is set to “Auto”, “1080i” or “1080p”, images will be output in 1080/24p. If images output in 24p are distorted, change the setting to “Off”. Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby. 1 Press [HOME]. 2 Select “Setup”. 3 Select “Player Settings”.
HDMI(VIDEO) Output Mode Set whether or not to output audio from the HDMI VIDEO OUT terminal. When an amplifier is connected to the HDMI AUDIO OUT terminal and this menu item is set to “Auto ( Video Only / Video+Audio )”, the TV may not output audio. In that case, select “Video+Audio”. 4 Select an item and change the settings. HDMI(AUDIO) Output Mode Set whether or not to output images from the HDMI AUDIO OUT terminal. It is not possible to output 3D, 4K or HDR content from the HDMI AUDIO OUT/HDMI VIDEO OUT terminal when “Video+Audio” is selected. To exit the screen Press [HOME]. HDMI Resolution The items supported by the connected devices are indicated on the screen as “ ў ”.
When any item without “ ў ” is selected, the images may be distorted. If “Auto”* 1 is selected, the best suited output resolution to the connected TV is automatically selected. Dolby Vision Setting You can set enable/disable of the Dolby Vision function. By changing this setting to “On”, you can use the Dolby Vision function under the following conditions: A device (TV, etc.) that supports Dolby Vision is connected ( > 10). A disc that supports Dolby Vision is played back. The “Video Settings” setting is disabled while using the Dolby Vision function. ( > 27) If all the conditions below are met, both Dolby Vision and HDR10+ are enabled.
In that case, playback in HDR10+ format takes precedence. The playback media or content is recorded in both Dolby Vision and HDR10+ formats. Both Dolby Vision and HDR10+ are supported by the connected device (TV, etc.). Both this function and “HDR10+ Setting” are set to “On”. 4K60p Output This unit automatically chooses to output images in 4K* 2 60p when connected to a 4K/60p compatible TV. This item is available only when “Resolution” is set to “Auto” and “4K”. This item is not available when “HDMI(AUDIO) Output Mode” is set to “Video+Audio”. To connect to a TV that supports 4K/60p (4:4:4/ 8 bit) or 4K/60p (4:2:2/12 bit), select “4K/ 60p(4:4:4)”.
Images will not be output correctly with an HDMI cable that does not support 18 Gbps. To connect to a TV that supports 4K/60p (4:2:0/ 8 bit), select “4K/60p(4:2:0)”. HDR10+ Setting You can set enable/disable of the HDR10+ function. By changing this setting to “On”, you can use the HDR10+ function under the following conditions: A device (TV, etc.) that supports HDR10+ is connected ( > 10). A disc that supports HDR10+ is played back. The “Optimum HDR Adjustment” setting is disabled while using the HDR10+ function.
( > 27) - 29 - Player Settings HDMI Video Audio 3D Language Network Ratings System OK RETURN Resolution Auto 4K60p Output Off 24p Output Auto HDMI(VIDEO) Output Mode Auto HDMI(AUDIO) Output Mode Audio Only Dolby Vision Setting Off HDR10+ Setting On Advanced Settings Video Audio 24p Output HDMI(VIDEO) Output Mode HDMI(AUDIO) Output Mode Auto Auto Audio Only 3D Language Dolby Vision Setting Off HDR10+ Setting On Advanced Settings Network Ratings System OK RETURN