No.16S058-01 4) CIRCLE Selects enable or disable for the circle maker display (Default: ON) a) ON The circle mask can be display. It is necessary to set “ON” at GRAPHICS to display the line makers. b) OFF The circle maker does not display. 5) Circle maker settings Sets the radius, the size (thickness), the center position and the color for the circle maker. a) RADIUS Sets the radius for the circle. The circle is the filled circle when setting “000”. b) SIZE Sets the size (thickness) for the circle. The circle maker does not display when the size is “0”. c) H POS Sets the horizontal center position for the circle. d) V POS Sets the vertical center position for the circle.
e) COLOR Sets the color for the circle. The color is selectable from Black, White, Red, Green, Blue, Cyan, Magenta, Yellow, USER0, USER1, USER2, USER3, USER4, USER5, USER6 and USER7. USER0 to USER7 are necessary to select wit the communication software. RADIUS H POS, V POS COLOR SIZE 15/49 STC-HD133 Series (STC-HD133DV / STC-HD133SDI) / STC-HD93 Series (STC-HD93DV / STC-HD93SDI) Users guide