No.16S058-01 3.2. The camera setting with the remote controller The remote controller (RC-HD133) is the separate accessary. 3.2.1. The camera setting by the remote controller connects to 3.5mm stereo pin jack A. It is necessary to assign the function for each button by the communication software. Please check the default functions at “E. The remote controller function”. B. The connector for the remote controller C. The remote controller circuit diagram D. The example remote controller E. The function for the remote controller buttons The below functions are assigned for SW-A to SW-F. SW-A: Display the OSD menu SW-B: Up cursor (Menu and select setting) SW-C: Left cursor (select setting) SW-D:
Execute the selected setting SW-E: Right cursor (Select setting) SW-F: Down cursor (Menu and select setting) Tip R1 1.8K R2 3.3K R3 4.7K R4 10K R5 27K GND 1 2 1 2 1 2 1 2 1 2 1 2 SW-A SW-B SW-C SW-D SW-E SW-F SW-A SW-B SW-D SW-C SW-E SW-F 7/49 STC-HD133 Series (STC-HD133DV / STC-HD133SDI) / STC-HD93 Series (STC-HD93DV / STC-HD93SDI) Users guide