No.16S058-01 3.2.2. The camera setting by SM06B-SRSS-TB (JST) connector on the board type camera A. It is necessary to assign the function for each button by the communication software. Please check the default functions at “E. The remote controller function”. B. The connector for the remote controller Note: The connector location for SDI model is same. C. The remote controller circuit diagram SW11 SW12 SW13 COLUMN2 COLUMN3 COLUMN1 ROW2 ROW3 ROW1 D. The example remote controller The function for the remote controller buttons The below functions are assigned for SW-11 to SW-13. SW-11: Page (-) SW-13: Page (+) Any function dose not assign for the SW-12, SW-21 to SW-33.
Please assign the function by the communication software if it is necessary. SW-11 SW-13 SW-12 SW-21 SW-23 SW-22 SW-31 SW-33 SW-32 8/49 STC-HD133 Series (STC-HD133DV / STC-HD133SDI) / STC-HD93 Series (STC-HD93DV / STC-HD93SDI) Users guide 1 2 D11 1234 SW21 1 2 D12 SW22 1 2 D13 SW23 56 1 2 1 2 1 2 D21 D22 D23 SW31 SW32 SW33 1 2 1 2 1 2 D31 D32 D33 1 2 D21 SW31 1 2 D31 1 2 D21 SW31 1 2 D31 1 2 D21 1 2 D22 SW32 1 2 D32 1 2 D31 1 2 D32