SUPER STORAGE SYSTEM 6027R-E1R12N — User's Manual (EN)

S UPER ® S UPER S TORAGE S YSTEM 6027R-E1R12N USER’S MANUAL 1.0a

Стр. 1

Preface The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Preface About This Manual Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software and docu­ mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license. This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the 6027R-E1R12N. Installation and maintainance should be performed by experienced technicians only.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. The 6027R-E1R12N is a high-end storage system based on the SC826E16-R920LP 2U rackmountable chassis and the X9DRi-LN4F+ dual processor serverboard.

Manual Organization Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not exceed the price paid for the hardware product. Chapter 1: Introduction FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ­ ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense.

The first chapter provides a checklist of the main components included with the system and describes the main features of the X9DRi-LN4F+ serverboard and the SC826E16-R920LP chassis. Chapter 2: Server Installation This chapter describes the steps necessary to install the 6027R-E1R12N into a rack and check out the server configuration prior to powering up the system. If your server was ordered without processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation. California Best Management Practices Regulations for Perchlorate Materials:

This Perchlorate warn­ ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate” WARNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other repro­ ductive harm. Chapter 3: System Interface Refer here for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. Manual Revision 1.0a Release Date: February 19, 2016 Chapter 4:

System Safety Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document. You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the 6027R-E1R12N. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2016 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America iii

Стр. 2

S UPER S TORAGE S YSTEM 6027R-E1R12N User's Manual Preface Notes Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X9DRi-LN4F+ serverboard, includ­ ing the locations and functions of connections, headers and jumpers. Refer to this chapter when adding or removing processors or main memory and when reconfig­ uring the serverboard. Chapter 6: Advanced Chassis Setup Refer to Chapter 6 for detailed information on the SC826E16-R920LP chassis. You should follow the procedures given in this chapter when installing, removing or reconfiguring SATA or peripheral drives and when replacing system power supply units and cooling fans. Chapter 7:

BIOS The BIOS chapter includes an introduction to BIOS and provides detailed informa­ tion on running the CMOS Setup Utility. Appendix A: BIOS Error Beep Codes Appendix B: System Specifications iv v

Стр. 3

Table of Contents S UPER S TORAGE S YSTEM 6027R-E1R12N User's Manual Table of Contents 3-3 Control Panel LEDs......................................................................................... 3-2 Power Fail........................................................................................................ 3-2 Chapter 1 Introduction Overheat/Fan Fail:........................................................................................... 3-2 1-1 Overview.......................................................................................................... 1-1 1-2 Serverboard Features......................................................................................

1-2 NIC1................................................................................................................. 3-2 NIC2................................................................................................................. 3-2 Processors....................................................................................................... 1-2 HDD................................................................................................................. 3-3 Memory............................................................................................................

1-2 Serial ATA......................................................................................................... 1-2 3-4 Drive Carrier LEDs.......................................................................................... 3-3 Power............................................................................................................... 3-3 PCI Expansion Slots........................................................................................ 1-2 Chapter 4 System Safety 1-3 Server Chassis Features.................................................................................

1-3 Rear I/O Ports.................................................................................................. 1-2 4-1 Electrical Safety Precautions........................................................................... 4-1 4-2 General Safety Precautions............................................................................. 4-2 System Power.................................................................................................. 1-3 4-3 ESD Precautions............................................................................................. 4-3 Hard Drive Subsystem.....................................................................................

1-3 Front Control Panel......................................................................................... 1-3 4-4 Operating Precautions..................................................................................... 4-4 Chapter 5 Advanced Serverboard Setup Cooling System................................................................................................ 1-3 5-1 Handling the Serverboard................................................................................ 5-1 1-4 Contacting Supermicro....................................................................................

1-6 Chapter 2 Server Installation Precautions...................................................................................................... 5-1 Unpacking........................................................................................................ 5-2 2-1 Overview.......................................................................................................... 2-1 5-2 Connecting Cables.......................................................................................... 5-2 2-2 Unpacking the System.....................................................................................

2-1 2-3 Preparing for Setup......................................................................................... 2-1 Connecting Data Cables.................................................................................. 5-2 Connecting Power Cables............................................................................... 5-2 Choosing a Setup Location............................................................................. 2-1 Connecting the Control Panel......................................................................... 5-2 Rack Precautions.............................................................................................

2-2 Server Precautions.......................................................................................... 2-2 5-3 Rear I/O Ports.................................................................................................. 5-3 5-4 Installing the Processor and Heatsink............................................................. 5-4 Rack Mounting Considerations........................................................................ 2-3 Installing an LGA2011 Processor.................................................................... 5-4 Ambient Operating Temperature.................................................................

2-3 Reduced Airflow.......................................................................................... 2-3 Installing a Passive CPU Heatsink.................................................................. 5-7 Removing the Heatsink................................................................................... 5-8 Mechanical Loading.................................................................................... 2-3 5-5 Installing Memory............................................................................................. 5-9 Memory Support..............................................................................................

5-9 Circuit Overloading..................................................................................... 2-3 Reliable Ground.......................................................................................... 2-3 DIMM Installation............................................................................................. 5-9 2-4 Installing the System into a Rack.................................................................... 2-4 5-6 Adding PCI Add-On Cards............................................................................ 5-14 5-7 Serverboard Details.......................................................................................

5-15 Separating the Sections of the Rack Rails...................................................... 2-4 Installing the Inner Rail Extension................................................................... 2-4 X9DRi-LN4F+ Quick Reference.................................................................... 5-16 Outer Rack Rails............................................................................................. 2-6 5-8 Connector Definitions ................................................................................... 5-18 5-9 Jumper Settings.............................................................................................

5-25 Chapter 3 System Interface 3-1 Overview.......................................................................................................... 3-1 5-10 Onboard Indicators........................................................................................ 5-29 3-2 Control Panel Buttons...................................................................................... 3-1 5-11 SATA Ports..................................................................................................... 5-30 5-12 Installing Software.........................................................................................

Стр. 4