S UPER S ERVER 6010H Manual Rackmount hardware (with screws): Two (2) rack rail assemblies Six (6) brackets for mounting the rack rails to a rack/telco rack One (1) CD-ROM containing drivers and utilities: Intel's Ф LANDesk Client Manager Intel's Ф LANDesk Server Manager ATI Rage XL AGP graphics controller driver LAN driver SCSI driver SuperServer 6010H User's Manual * Type and number depends upon the configuration ordered. 1-2 Server Chassis Features The SuperServer 6010H is a high-end, scaleable 1U rackmount server plat- form designed with today's most state-of-the-art features. The following is a general outline of the main features of the SC810 chassis.
System Power When configured as a SuperSever 6010, the SC810 chassis includes a 250W power supply. SCSI Subsystem The SCSI subsystem supports two 80-pin SCA Ultra160 SCSI hard drives. (Any standard 1" drives are supported. SCA = Single Connection Attach- ment.) The SCSI drives are connected to an SCA backplane that provides power, bus termination and configuration settings. The SCSI drives are also hot-swap units. Control Panel The SC810's control panel provides important system monitoring and control information. LEDs indicate power on, network activity, hard disk drive ac- tivity and system overheat conditions. The control panel also includes a main power button and a system reset button.
1-2