Light controls Vehicle equipment [ Follow-me-home delay time set ting] : to set the continuous lighting time of the position lamp and the low Please note that this manual contains all the standard equipment, country-specif beam headlamp after the "follow-me- home" function is triggered. ic equipment and special equipment for this model series. Thus, some equip ment or features described in this man Atmosphere lamp setting cle or are only available in some mar kets. For further configuration informa tion, please refer to relevant sales infor mation or consult with your distributor selling the vehicle to you.
Lamp settings ual may not be installed onto your vehi The working state of the atmosphere lamp can be set. Operation [Search mode setting] : the vehicle prompt mode can be set when the vehi Mode settings cle locating function is triggered. Light control combination switches Set the working state of lighting-related functions through the [vehicle set ting] — > [lighting setting] on the mul Main light knob timedia display screen. Time settings H NOTICE Before you lock and leave the vehicle, please turn the main light knob to the OFF or AUTO position to reduce the power consumption of the vehicle and prevent the undervoltage battery from affecting the normal use of the vehicle.
[Power saving delay time setting] : to set the delay effective time of the power saving function. After the ignition switch is turned to the LOCK position, if the state of the ignition switch, the door lock and the emergency flashers switch don't change within the set time, the power saving function will be activated auto matically to save power. [ Dome lamp delay time setting] : to set the delay time for the interior lamps to go out after all doors are closed when the interior lamps are on due to the door control function. 49