en 33 ●Remove the fl oat (8e) and clean with a damp cloth. Cleaning the milk system If the milk system was not cleaned after milk has been dispensed, after a certain amount of time the message Rinse milk system! will appear on the display. Clean the milk system immediately after use! To pre-clean the milk system automatically: 1. Select f by turning the rotary knob (14). 2. Place a receptacle under the milk frother (6). 3. Press the start button (10). 4. Pull the milk frother (6) to open it. The appliance now automatically fi lls the receptacle with water. The rinse pro- cedure stops automatically after about 1 minute. 5. Push the milk frother (6) in to close it. 6.
Let the milk frother (6) cool down. 7. Empty the receptacle and wipe dry the outside of the milk frother (6). In addition to this, clean the milk system thoroughly at regular intervals (by hand or in the dishwasher). K Do not put the following items in the dishwasher: drip tray panel (8a), fl oat (8e), drawer (4), brewing unit (5a). J The following items are dishwasher- safe: drip tray for coffee outlet (8c), coffee grounds container (8b), grate for coffee outlet (8d), aroma cover (2) and measuring spoon (18). ●Wipe out the inside of the appliance (tray holders and drawer). Important:
Drip tray for coffee outlet (8c) and coffee grounds container (8b) should be emptied and cleaned daily to prevent mould from developing. Dismantling the milk system for cleaning: 1. To remove, take hold of the metal sleeve and pull it downwards and off. N.B.: If the appliance is cold when switched on with the power switch O / I (9) or if it switches off automatically after coffee has been dispensed, it rinses automatically. In other words the system cleans itself. Important: If the appliance has not been used for a prolonged period of time (e.g. after a vacation), clean the entire appliance thoroughly, including the milk system and brewing unit. TES552...
| 05/2013 TES55236RU.indb 33 04.06.2013 14:35:46